Size: 1.52*30 m
PVC Film: 0.14 mm
Glue: Permanent PSA
Release paper: 140 gsm
Design: Fragment, magic circle, matrix, wave, sunflower etc.
1. High stretch film, can be wrap car body.
2. Many design graphic can be choose.
3. With air channel, easy to install.
4. PVC material, environment friendly.
5. 3D texture design, elegant and beauty.
6. Long service time, 3-5 years durability.
How to Install:
1. First volume of a good length for your body size, according to the amount of good film cut to size the length of a good car, cutting out it.
2. To clean the surface and around the body in order to avoid dust, you can spray some of the appropriate mixture of water and lube to the car body and car membrane for water and scraping the mucous membrane when the bubble.
3. Film when the surface curvature is large, the wind can be a hair dryer or heat gun can be attached more perfect.
4. Finally, the body lines with a knife according to film, the excess membrane can be torn off, the construction is completed.
Tips of installing:
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles
4. You could buy the best heat gun and squeegee in our company Kind Reminds:
1) No pasting in rainy or cloudy weather.
2) No waxing one week before the pasting of the car sticker.
3) No washing in 48 hrs after the pasting. If there is crimp or crease or if the temperature is low, better blow it with a hair drier first from a certain distance and then to paste.